
Side / Rotating Sweeping Brushes
Used to move debris from curb lines, corners, machine edges, and side paths into the main sweeping area.
View side brushes & gutter brooms
Custom road sweeper brushes, sweeper brooms, and replacement brush assemblies for municipal, contractor, airport, parking-lot, and industrial sweeping equipment.

Sweeper brushes are wear parts. The buyer usually needs a brush that fits the machine first, then performs correctly on the pavement, debris, and sweeping speed in daily service.
For replacement projects, a machine model, brush photo, worn sample, or measured drawing helps confirm the core, mounting, brush diameter, fill type, and working length before production.
Most sweeper brush requests start from the brush position and machine fit. Confirm the dimensions, mounting, fill material, and operating surface before replacement production.

Used to move debris from curb lines, corners, machine edges, and side paths into the main sweeping area.
View side brushes & gutter brooms
Round machine-mounted disc brushes manufactured to the confirmed diameter, brush base, center opening, fill material, and cleaning duty.
View floor scrubber disc brushes
Stacked on a core for road sweeping, runway sweeping, snow sweeping, and heavy-duty replacement assemblies.
View sweeper wafer brushes
Used as the main sweeping contact under road sweepers, ride-on sweepers, and industrial floor machines.
Used as replaceable strip sections for linear sweeping contact or brush assemblies mounted across a frame.

Used where the machine accepts a tube-style main broom with a plastic core, shaft, or replacement brush assembly.
Examples of main brushes, side brushes, and tube brooms we have manufactured for sweeping and floor cleaning equipment.

Previously manufactured as a replacement for Tennant 6100 sweepers. Common filament options are PP or PBT.

Previously manufactured replacement main brushes for Dulevo D3 sweepers, with poly filaments. Fill material can be customized to your requirements.

Previously manufactured for Tennant S30 sweepers, with a 9 in bristle length.

A previously manufactured replacement brush compatible with the Viper PS480 sweeper.

A previously manufactured replacement for industrial floor sweeping.

Previously manufactured for the cylindrical-brush configuration of the Tennant T20 floor scrubber.

A previously manufactured spiral-wound tube broom for road sweeping and snow removal.

Previously manufactured for selected PowerBoss sweepers and sweeper-scrubbers.
Confirm the hub and machine serial number: 3305663 and 3305663-PH use different hubs.

Previously manufactured replacement main brooms for road and street sweeping.
Dimensions vary by build and must be matched together for the machine.

Previously manufactured replacement brushes, shown during production and packaging.
Many sweeper brush buyers search by machine model or original brush position first. Brand and model names can help identify the starting direction, but the final quote still depends on the measured brush body, mounting detail, bristle material, and working surface.
For requests such as Tennant 6100, Tennant 800D, Tennant T20, Viper PS480, Dulevo, Karcher, Johnston, or Elgin style main brushes, the machine model is useful but the brush dimensions still need to be checked.
Side brooms and gutter brooms are selected by top plate, bolt pattern, brush diameter, wire or poly fill, and whether the brush is used for curb lines, corners, or heavier edge debris.
View side brushes & gutter broomsWafer and segment brushes are often matched by inner diameter, outside diameter, channel type, wafer stack, section count, and road, snow, or airport runway sweeping conditions. Airport cassette systems require separate confirmation of the cassette profile, core layout, fill, and complete-set quantity.
View airport runway brush cassettesMachine and brand names are used only as replacement-fit references. Brushcustom is not affiliated with those equipment brands.
The same sweeper broom shape can perform differently depending on pavement roughness, debris load, brush pressure, wet or dry use, and replacement interval.

Replacement sweeper brushes for municipal street sweepers, contractor sweepers, curb-line cleaning, and road maintenance work.
Brushes for paved surfaces, warehouse entrances, factory yards, loading areas, and mixed light-to-medium debris.
Sweeper broom directions can be reviewed for runway, apron, terminal, and other large-area pavement cleaning equipment.
Wire, poly/wire, or stiffer synthetic fills may be reviewed where dust, sand, aggregate, compacted dirt, or heavy residue is present.
Material selection should follow surface condition, debris type, expected wear life, moisture, brush pressure, and whether the machine can accept a more aggressive sweeping action.

A common sweeper brush material for general road, parking-lot, and industrial sweeping where moisture resistance and cost control matter.
Reviewed where the project needs stronger wear life, better recovery, or more stable brushing contact than standard PP.
Used where rough pavement, compacted dirt, scale, or heavier debris requires a more aggressive sweeping action. Surface condition and machine load should be checked before selection.
PP or nylon filaments can be mixed with steel wire to combine debris carrying with stronger cutting and loosening action. This direction is often reviewed for uneven paved surfaces and mixed urban road debris; the material ratio must match the machine load and cleaning duty.
The fastest review comes from matching the brush to the sweeper model, brush position, mounting interface, and the actual sweeping condition.
Sweeper brush life cannot be defined by one operating-hour figure. Pavement, debris, brush pressure, fill material, machine setup, and daily use all affect the wear rate.
Replace the brush when it no longer sweeps effectively, cannot maintain the machine's specified sweep pattern after adjustment, has uneven or damaged bristles, or reaches the equipment manufacturer's minimum bristle length or working diameter. Always follow the limits for the exact sweeper model.
Custom production from your drawing. Minimum order quantity: 20 pieces. Large-volume production is supported for OEM and replacement projects.