Municipal and commercial waste screening
For defined screen-cleaning positions handling mixed and fibrous waste streams.
Machine & Equipment Applications
Custom Trommel Screen Brushes
Custom cleaning brushes for mobile and stationary trommel screens. Made to drawing for bulk OEM and replacement orders.
Designed to clear screen apertures, reduce material buildup, and help maintain effective screening area in recycling and bulk-material processing.
Send Your DrawingBrush-to-Screen Contact
How Trommel Screen Brushes Work
A trommel cleaning brush contacts the outside of the rotating screen drum and helps release material lodged in the apertures. The brush may be driven or may rotate through contact with the drum, depending on the machine design.
Effective cleaning depends on the brush outside diameter, screen-drum diameter, mounting centre distance, trim length, and working engagement. Filament stiffness alone cannot correct an unsuitable contact position or an incorrectly sized brush.
A cleaning brush cannot prevent all screen blinding. Results also depend on the screen design, aperture, material condition, feed rate, rotation, and machine setup.
Screen Cleaning Applications
Trommel Screen Brush Applications
Trommel screen brushes are used where wet, fibrous, sticky, or soil-laden material can block screen apertures and reduce effective screening area.
Construction and demolition waste screening
For cleaning drums exposed to fines, soil, and adhering material.
Compost, soil, mulch, and wood-waste screening
For screen-cleaning positions where material can pack into apertures.
Fine-fraction screening
For applications where smaller apertures require consistent cleaning to maintain screening performance.
OEM and replacement programs
For new equipment builds or replacement brushes matched to an existing trommel screen.
Replacement Brush Review
Machine Families We Can Review
Replacement projects may reference the following common trommel screen families:
- Terex Ecotec TTS 518 / 518T and TTS 620 / 620T; Terex Recycling TTS-620SE and TTS-720
- McCloskey 512, 516, 621, 628, and 733 families
- Doppstadt SM 518.2, SM 620.3, SM 620.2 K / SA, and SM 720.2 SA
- Vermeer TR5300 / TR5300EM, TR626 / TR626EM, TR6400, TR6450, and TR6500TX
- Powerscreen Phoenix 1600 / 1600T, 2100, and 3300
- Komptech Cribus 2800 / 3800 / 5000 and Nemus 2700 / 3000
- Eggersmann TERRA SELECT T 50 / TE 50 and T 60 / TE 60
- Pronar MPB 14.44, 18.47, 20.55, and 20.72 families; EDGE TRT516 and TRT622
Make and model provide context only. Model-year changes, options, and later modifications can affect fit; confirm brush dimensions, mounting, and construction from a detailed drawing approved for production.
Custom Brush Formats
Trommel Brush Constructions We Customize
Driven and free-running arrangements can be reviewed. Confirm the rotation method, drive end, shaft, bearings, or holder before designing the replacement.
Complete roller brushes with the required shaft, stub shaft, bushing, or bearing arrangement.
Spiral-wound or brush-coil constructions for installation on an existing shaft or core.
Machine-specific replacement assemblies, including wafer or ring sections where used in the existing design.
Drawing-Based Production
Built for OEM and Replacement Orders
Brush fill, stiffness, density, trim, core, shaft, and mounting details are confirmed for the screen surface and processed material. Nylon, polyester, PP, wire, and mixed fill are not interchangeable; the right direction depends on the screen media, aperture, material condition, brush position, and operating environment.
We support bulk customization and repeat supply for equipment manufacturers, distributors, and maintenance teams.
Request a QuoteOEM & Replacement Supply
Send Your DrawingNeed Custom Trommel Screen Brushes?
Send a detailed brush drawing and the required quantity for an OEM or replacement quotation.